Tough yet flexible seal.	Bonds to both asphalt and concrete.
Pourable, self-leveling.	Convenient 1 gallon can package.
Minimum equipment required for application.	Unaffected by salts, auto fluids, gasoline, etc.
Quick cure allows traffic lanes to be opened faster, with no pick-up or tacking.	Other packaging available (5 gallon & 55 gallon drums)

Pro-Seal 6006 is a flexible, two-component pourable grade sealant.  Specially designed for sealing traffic detector loops in both asphalt and concrete. Pro-Seal 6006 fully encapsulates the loop wires for added protection. 6006 is also an excellent sealant for embedding preformed detector loops.

• Home • Ordering • Contact Us • Index Page 1 • Index Page 2 • Index-Page 3 • Reference •

Mixing

1.  Remove lid and add the required amount of catalyst (Hardener). Remember to use less catalyst in the summer and more catalyst in the winter. See Chart

2.  Mix for 30-45 seconds using a variable speed drill equipped with a mixing attachment. If mixing by hand, use a paint stir stick or other suitable device and mix for a minimum of three minutes.

Application Instructions:

1.   Pour "mixed" Pro-Seal 6006 into loop slot, encapsulating loop wires.

2.   Scrape any excess sealant off roadway with a squeegee.

Curing:

The amount of catalyst (hardener) used can be varied for a faster or slower cure. Consult Technical Data Sheet DLS-1 for cure times.

Packaging:

Pro-Seal 6006 is packaged in convenient 1 gallon cans, 5 gallon pails, and 55 gallon drums for use with pneumatic pump systems

Storage:

Shelf life is one year in original unopened containers. Do not store above 100°F

PDF Version