Reno A & E Inductive Loop Vehicle Detectors / Detector

Low Power / Low Current Consumption Single Channel Inductive Loop Detectors

Reno A&E is committed to designing and manufacturing the world's finest transportation control products.

Features & Benefits

Engineering Excellence!

Reno A & E BX-LP Low Power / Low Current Consumption Single Channel Inductive Loop Vehicle Detector

Second CALL Delay.

Dual Programmable relays offer selectable modes of operation:

Loop Diagnostics: Front panel "Fail" LED indicates Open/Shorted Loop condition. A second distinct flash rate indicates a loop failure has occurred and was corrected.

Sensitivity Boost, for gate operation where high profile vehicles might be encountered.

All switches are accessible from the front panel.

Excellent detector for all solar and battery-sourced installations.

Extremely "Low Current Consumption". When LEDs are deactivated and utilizing factory set positions, the Model BX-LP (relay version) draws 30.0 milliamps max. and the Model BX-LP-SS (solid-state version) draws 4.0 milliamps max. See the "Power" specification below.

4 loop frequencies selectable from the front panel.

Selectable FAIL-SAFE or FAIL-SECURE operation when a loop fault occurs.

Output A: True Presence™ (Infinite) or Limited Presence.
Output B: Presence or Pulse on Entry or Pulse on Exit.

1 pin rear "Amphenol" connector.

Automatically turns off after 3 minutes of power on or after a reset to conserve power.

Super bright LEDs provide separate DETECT, and loop FAIL indications. The "DET" LED

8 levels of sensitivity selectable from front panel rotary switch.

Configurations available: 12 VDC (24 VDC available by special order).

• Home • Ordering • Contact Us • Index Page 1 • Index Page 2 • Index-Page 3 • Reference •

PDF Cut Sheets

Model BX-LP Series